The 5 tankless heaters we'd put in for the morning rushTop 5 tankless heaters → See the ranking

ORBEK 14 kW Electric, 240V Review

Written from the listing's specs, not from our own use · How we rate

The ORBEK 14 kW Electric (240V) packs up to 3.38 GPM and 14 kW for one tap into one point-of-use heater. Think of it for a powder room, a garage sink or a tiny house: 7.7/10 on what its listing documents.

Price$189.99Price on Sep 30, 2026 · may have changed
Compare side by side ↗
Specifications
BrandORBEK
CategoryElectric tankless water heaters
FuelElectric
Stated maximum flow3.38 GPM
Stated heating power14 kW
Stated voltage240 V
Total current150 A
Wire gauge6 AWG
ASINB0FRFJVG8L

Full listing title: 14kW Tankless Water Heater Electric ORBEK On Demand Heater 240V 3.38GPM

Listing evidence
Fuel14kW Full listing title
Stated maximum flow3.38GPM Full listing title
Stated heating power14kW Full listing title
Stated voltage240V Full listing title
Updated October 2026
Exact listing, ASIN B0FRFJVG8L
Rating from a published formula

Compared with its closest rivals

Two electric tankless heaters of about the same power, closest to it on our rating, each with a dated price.

Compare side by side ↗

ORBEK 14 kW Electric, 240V

ORBEK 14 kW Electric, 240V

7.7Very good · out of 10$189.99 Price on Sep 30, 2026 · may have changed
  • Stated: 3.38 GPM · 14 kW · 240 V
  • Electric tankless water heaters
This product ↑
Westinghouse 14 kW Electric, 240V

Westinghouse 14 kW Electric, 240V

7.7Very good · out of 10$319.99 Price on Sep 30, 2026 · may have changed
  • Stated: 14 kW · 240 V
  • Electric tankless water heaters
See the review ↗
ThermoMate 14 kW Electric, 240V

ThermoMate 14 kW Electric, 240V

7.9Very good · out of 10$249.99 Price on Sep 30, 2026 · may have changed
  • Stated: 3.4 GPM · 14 kW · 240 V
  • Electric tankless water heaters
See the review ↗

14 kW at 240 V

The heating power the listing states; at 240 V that's about 58 A. On our calculator's maths it gives about 2.2 GPM of 105 °F water when the tap water comes in at 62 °F, and less in winter. Enough for a kitchen or a bathroom sink.

What it has going for it

What changes at the sink

3.38 GPM max. That is the headline figure, usually at a modest temperature rise. Our calculator counts a shower at 2 GPM, so think one shower at a time.

Safety listing. CSA, ETL or UL certification is named in the listing. Inspectors look for that mark before they sign off.

One sink or a shower?

One sink: about 2.2 GPM of 105 °F water with 62 °F tap water, on our calculator's maths. That covers a kitchen or a bathroom sink.

A shower: on paper, with warm tap water, just about (a shower takes about 2 GPM). In January it falls short.

Great for you if…

  • You need one shower or one sink at a time, not the whole house
  • The kitchen or the powder-room sink takes forever to run hot

Skip it if…

  • You want hot water for the whole house: 14 kW is sized for one tap
  • You'd rather wait for buyer reviews: none are captured for this listing yet
  • You want the power to follow the flow: the listing doesn't say it modulates

Power, wiring and what's in the box

What the ORBEK 14 kW Electric (240V) listing names:

  • 14 kW
  • 240 V
  • 150 A total draw
  • 6 AWG wire
  • Up to 3.38 GPM
  • Digital display
  • CSA, ETL or UL mark named

Breakers and wire gauge are in the installation manual, and it overrides anything above; your electrician reads it first.

ORBEK 14 kW Electric, 240V, view 3

Price and cost per kW

$189.99 Price on Sep 30, 2026 · may have changed

At the price on Sep 30, 2026, each kW of stated heating power works out at about $13.57 (price ÷ stated kW, our arithmetic). That puts it in the cheaper third of the 17 point-of-use heaters we have a price and a stated power for.

Count a plumber's visit and, unless it plugs in, an electrician for the circuit.

The button opens the exact listing (ASIN B0FRFJVG8L), where today's price, stock and seller apply.

ORBEK 14 kW Electric, 240V, view 4

A better fit for that tap?

Want the shower covered too? The Rheem 18 kW Electric, 240V (9.3/10) is an 18 kW whole-house unit.

Want it to draw only what it needs? The ThermoMate 14 kW Electric, 240V (7.9/10) is self-modulating, per its listing.

Our take

The verdict

The ORBEK 14 kW Electric (240V) earns its place with up to 3.38 GPM and 14 kW for one tap. No buyer reviews yet, so this ORBEK point-of-use heater has to win you over on paper. Where it falls short: it is built for one tap, and a second fixture opened at once will run lukewarm. We'd pick it if you need one shower or one sink at a time, not the whole house; otherwise, put it next to the ThermoMate 14 kW Electric (240V) first.

Living with it

Install day

6 AWG wire, the unit on the wall next to the old tank's spot, water in and out. Under a sink or on the wall beside it, close to the tap it feeds.

The first shower

Hot in a few seconds once the water in the pipes has passed. Set it, then leave it.

The first winter

With 42 °F water coming in, 14 kW gives about 1.5 GPM at 105 °F on our calculator's maths. Low-flow shower heads stretch that further.

Upkeep

Clean the inlet screen and flush out scale on hard water. Our flushing and descaling guide has the routine.

The one thing we'd check first

Before the ORBEK 14 kW Electric (240V) goes in your cart, check the tap it will feed: 14 kW suits one sink or a low-flow shower.

Before you buy

Which tap

14 kW warms one sink or one low-flow shower, not two. Decide the fixture first, then check the flow it needs. Our point-of-use guide explains the trade-off.

Power

It runs on 240 V. At 240 V it needs a dedicated circuit; an electrician confirms the breaker and the wire.

Activation flow

Small units need a minimum flow to switch on. Ask the seller for that figure if you have low-flow aerators.

Scale

Electric units scale too, mostly at the inlet screen and the element. Our flushing and descaling guide covers the routine.

How it compares

How the ORBEK 14 kW Electric (240V) stacks up against the closest alternative, the ThermoMate 14 kW Electric (240V).

CriterionORBEK 14 kW Electric, 240VThermoMate 14 kW Electric, 240V
Our rating7.7/107.9/10
Max flow3.38 GPM3.4 GPM
Self-modulatingNot statedStated

Pick the ThermoMate 14 kW Electric (240V) if you want our higher-rated option (7.9/10), with more stated flow (3.4 GPM) and self-modulating power.

The score in detail

How we rated it

Spec-based rating on a 4.5–8.5 scale: 4.5 + average of the 4 criteria × 0.4. Capped at 8.5 because no customer evidence is included.

Key specifications

9 / 10

Build, warranty & certifications

6 / 10

Listing documentation

9 / 10

Fit & compatibility

8 / 10

This product has no captured buyer-review record yet, so its rating comes from the documented listing alone: four criteria scored out of 10 (key specifications; build, warranty and certifications; listing documentation; fit and compatibility), placed on a 4.5–8.5 scale. Read the full methodology.

Read the methodology →

Frequently asked questions

Is the ORBEK 14 kW Electric (240V) any good?

We rate it 7.7/10 (very good). The rating comes from its documented listing alone, as no customer-review record is captured yet.

How much hot water can the ORBEK 14 kW Electric, 240V deliver?

The listing states a maximum flow of 3.38 GPM and a heating power of 14 kW on 240 V. The headline flow is a mild-weather number: with cold winter water coming in, the same unit gives you less. Read the maker's flow chart at your winter rise, or let our flow-rate calculator do the sums.

What electrical service does the ORBEK 14 kW Electric, 240V need?

The listing states 240 V and 14 kW. At 240 V, that is roughly 58 A. A licensed electrician checks the panel, the breakers and the wiring before it goes on the wall.

What do you get with the ORBEK 14 kW Electric (240V)?

Its listing states up to 3.38 GPM and 14 kW for one tap. These are the seller's figures, not our measurements: how steady the temperature is in your shower and how it copes with your winter water can't be read from a listing.

What should I check before ordering the ORBEK 14 kW Electric (240V)?

Which tap: 14 kW warms one sink or one low-flow shower, not two. Decide the fixture first, then check the flow it needs. Our point-of-use guide explains the trade-off. Power: it runs on 240 V. At 240 V it needs a dedicated circuit; an electrician confirms the breaker and the wire. Activation flow: small units need a minimum flow to switch on. Ask the seller for that figure if you have low-flow aerators. Scale: electric units scale too, mostly at the inlet screen and the element. Our flushing and descaling guide covers the routine.

Where can I buy the ORBEK 14 kW Electric (240V)?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.

Have you used the ORBEK 14 kW Electric (240V) yourselves?

No, we haven't used it ourselves. Everything on this page comes from its listing, read line by line and weighed with our published formula.