
GASLAND Gasmart E 199,000 BTU
6.9Good · out of 10$629.99 Price on Sep 30, 2026 · may have changed- Stated: 7.6 GPM · 199,000 BTU/h
- 63 buyer reviews
- Gas tankless water heaters

Product images: Amazon listings
Written from the listing and 63 buyer reviews, not from our own use · How we rate
The GASLAND Gasmart E 199,000 BTU packs up to 7.6 GPM and built-in freeze protection into one indoor gas tankless heater. 63 buyers rate it 4.2/5, and it suits replacing a 40-gallon tank in a mid-size home.
| Brand | GASLAND |
|---|---|
| Category | Gas tankless water heaters |
| Fuel | Natural gas |
| Stated mounting location | Indoor |
| Stated maximum flow | 7.6 GPM |
| Stated gas input | 199,000 BTU/h |
| Freeze protection | Stated in the listing |
| Buyer reviews | 63 · 4.2/5 |
| ASIN | B0DS1544T6 |
Full listing title: GASLAND Gasmart E 199,000 BTU Tankless Water Heater, Up to 7.6 GPM, CSA Certified Whole House Natural Gas Indoor Installation Residential On-demand Instant Hot Water Heater, CE686NG
| Fuel | Natural GasFull listing title |
|---|---|
| Stated mounting location | IndoorFull listing title |
| Stated maximum flow | 7.6 GPMFull listing title |
| Stated gas input | 199,000 BTUFull listing title |
Two gas tankless heaters on natural gas too, with about the same flow, closest to it on our rating, each with a dated price.



That's the maximum flow the listing states, and headline flows are usually quoted at a mild temperature rise. A cold January asks for a 63 °F rise (42 °F in, 105 °F out), and at that rise every tankless gives less than its headline; the maker's chart says how much. At 2 GPM a shower (our calculator's figure), the headline means two showers and a kitchen tap, less when the water comes in cold.
What it has going for it
Freeze protection. Stated in the listing. Useful in a garage, a crawl space or a cabin that sits empty in winter, as long as the unit keeps power.
Safety listing. CSA, ETL or UL certification is named in the listing. Inspectors look for that mark before they sign off.
One at a time, plus the kitchen tap: 7.6 GPM covers that on paper.
Two at once: possible where the tap water comes in warm. In a northern January the second shower is the one that runs lukewarm, so read the flow chart at a 63 °F rise first.
What the GASLAND Gasmart E 199,000 BTU listing names:
Read the installation manual for the vent, the gas line size and the clearances before you order; it overrides anything above.

At the price on Sep 30, 2026, each GPM of stated maximum flow works out at about $82.89 (price ÷ stated GPM, our arithmetic). That puts it in the cheaper third of the 45 indoor gas tankless heaters we have a price and a stated flow for.
The online price is the heater alone. Venting, a bigger gas line where needed and the installer's day are a separate bill, often as big as this one.
The button opens the exact listing (ASIN B0DS1544T6), where today's price, stock and seller apply.

Two showers and the dishwasher at once? The MIZUDO 199,000 BTU Natural Gas Indoor (9.2/10) states up to 10.3 GPM.
No easy route for a vent pipe? The Rheem RTG 8.4 GPM Natural Gas Outdoor (7.7/10) mounts on an outside wall, per its listing.
Want the high-efficiency kind? The Rheem RTGH 8.4 GPM Natural Gas Indoor (7.3/10) is a condensing unit, per its listing.
Our take
We like the GASLAND Gasmart E 199,000 BTU for up to 7.6 GPM and built-in freeze protection. Only 63 buyers have rated it so far (4.2/5), so treat the score as an early read. The catch with this GASLAND indoor gas tankless heater: no stated temperature hold, while most picks here claim ±1 °F. We'd pick it if you run one shower and the kitchen tap at once, rarely more; otherwise, put it next to the Eccotemp i12-LP Propane Indoor first.
Old tank out, unit on the wall, vent through the wall or the roof. Plan the gas line for 199,000 BTU/h; a licensed pro handles it, and often a permit.
Hot water arrives after the cold already in the pipes, then stays. A trickle from a bathroom tap may not light the burner; open it a bit more.
January water comes in colder, so the same unit gives fewer GPM. Stagger the showers if you sized it tight.
Flush the heat exchanger with a pump and a descaler (the service valves make it an hour's job), and clean the inlet filter. Our flushing and descaling guide has the checklist.
Buyers give it 4.2/5, a solid record, slightly below our ranked picks' 4.3 average. 63 reviews is still a modest pile, so a handful of new ones can move it.
Before the GASLAND Gasmart E 199,000 BTU ships, check your gas line: 199,000 BTU/h is a lot of gas at once, so ask your plumber whether the existing line can feed it.
7.6 GPM is the headline. In a northern January the water comes in near 42 °F, so a 105 °F shower needs a 63 °F rise and the real flow drops. Our flow-rate calculator runs the numbers for your house.
Ask the plumber to check the gas line size and the meter against the heater's input, and to quote the vent route at the same visit. Our install cost guide shows what that usually adds.
Read what it requires: a licensed install, the gas type and regular flushing are the usual conditions.
Hard water scales the heat exchanger. Service valves on the water lines turn the yearly flush into an hour with a bucket and a pump; our flushing and descaling guide shows the routine.
How the GASLAND Gasmart E 199,000 BTU stacks up against the closest alternative, the Eccotemp i12-LP Propane Indoor.
| Criterion | GASLAND Gasmart E 199,000 BTU | Eccotemp i12-LP Propane Indoor |
|---|---|---|
| Our rating | 6.9/10 | 6.9/10 |
| Max flow | 7.6 GPM | Not stated |
| Gas input | 199,000 BTU/h | Not stated |
| Buyer reviews | 63 · 4.2/5 | None captured |
Both score 6.9/10. The GASLAND Gasmart E 199,000 BTU brings more flow (7.6 GPM) and a bigger burner (199,000 BTU/h), so it has the edge on paper.
We rate it 6.9/10 (good). It is based on 63 buyer reviews averaging 4.2/5 and the specifications stated in the listing.
The listing states a maximum flow of 7.6 GPM and a gas input of 199,000 BTU/h. The headline flow is a mild-weather number: with cold winter water coming in, the same unit gives you less. Read the maker's flow chart at your winter rise, or let our flow-rate calculator do the sums.
Yes, the listing says indoor mounting. That means a vent route to the outside, combustion air and a gas line sized for the unit, all as the maker and your local code require. A licensed plumber or gas fitter sorts that out.
Its listing states up to 7.6 GPM and freeze protection. These are the seller's figures, not our measurements: how steady the temperature is in your shower and how it copes with your winter water can't be read from a listing.
Your winter flow: 7.6 GPM is the headline. In a northern January the water comes in near 42 °F, so a 105 °F shower needs a 63 °F rise and the real flow drops. Our flow-rate calculator runs the numbers for your house. Vent and gas line: ask the plumber to check the gas line size and the meter against the heater's input, and to quote the vent route at the same visit. Our install cost guide shows what that usually adds. The warranty terms: read what it requires: a licensed install, the gas type and regular flushing are the usual conditions. Flushing: hard water scales the heat exchanger. Service valves on the water lines turn the yearly flush into an hour with a bucket and a pump; our flushing and descaling guide shows the routine.
We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.
No, we haven't used it ourselves. Everything on this page comes from its listing and 63 buyer reviews, read line by line and weighed with our published formula.